Barrel Length: 20”
Barrel Material: 4140 Nitride
Barrel Profile: A2 Style
Chamber: .308 WIN
Twist Rate: 1 in 10”
Gas System: Rifle-Length
Gas Block Type: Low-profile 5 position click switch adjustable gas block
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: PA10 Flat top with Feed Ramps
Receiver Finish: PSA Custom Teflon Coated
Forward Assist: Yes
Dust Cover: Yes
Handguard Type: PSA Custom 15″ Cross Cut MLOK Handguard
Bolt Carrier Group: PA10 BCG with extra power extractor spring
Staked Gas Key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: PSA Custom Finish, Teflon-based
Fire Control Group: PSA Custom 3.5LB Flat Trigger
Buffer Tube: 7075 T6 Aluminum
Adjustment: 6-position telescoping stock
Stock: Magpul MOE
Grip: Magpul MOE
Magazine: 20 Round PMAG
The Palmetto State Armory Custom Series continues to take the Gen3 PA10 platform to the next level with in-house customization and custom paint jobs. The Gen3 model has been enhanced to improve the reliability and longevity of our PA10 platform.
Gen 3 Benefits at a glance:
Lower Includes relief cuts for a broader compatibility with 308 BCG’s
Standardized carbine length buffer tube with short, heavy buffer
4140 Nitride Barrel
5 Position Adjustable Click Switch Gas Block
Extra Power Extractor Springs
7075 T6 Charging Handle Included in all uppers
Barrel Nuts properly torqued to military specifications
Anti-slip and anti-rotation handguards
The Gen3 model offers a stainless steel gas tube to better resist high heat and corrosion. All Gen3 PA10 models come with a dimpled barrel for ease of gas block replacement if you choose to do so. We have also included a PSA Custom click switch 5-position adjustable gas block so you can specifically tune to your load.
The Palmetto State Armory PA10 Gen3 features a forged receiver set that has been designed with a relief cut geometry to allow the use of a wider variety of aftermarket bolt carrier groups. A carbine length buffer tube with a short, heavy buffer coupled with a standard PA10 buffer spring. All Gen3 PA10 rifles from Palmetto State Armory come equipped with a Toolcraft BCG, which ensures thousands and thousands of rounds will feed through the rifle.
Barrel: 4140 Nitrided Steel, 308 1/10 twist, rifle-length gas system upper is paired with a Palmetto State Armory Custom Series M-Lok free-float rail, low profile adjustable click detent 5 position gas block, and an A2-style muzzle device. The gas system is enhanced with a stainless steel gas tube in order to better resist high heat and corrosion.
Upper: Precision machined from forged 7075-T6 aluminum, then coated with a hard as nails Teflon-based finish in our PSA Custom shop. With enhanced dual retention anti-slip and anti-rotating handguards.
Bolt Carrier Group: Tool craft 9310 steel bolt assembly with extra strength extractor springs that is nitride for increased durability. 8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners. A 7075 T6 aluminum charging handle is also included.
Lower: Precision machined from forged 7075-T6 aluminum, these lowers are then coated with a hard-as-nails Teflon-based finish in our PSA Custom shop. This is an ideal platform for the .308 cartridge.
The Palmetto State Armory Custom Series line of accessories, components, and firearms are designed to give you the tactical or competitive advantage when you need it most!
There are no reviews yet.