Barrel Length: 20”
Barrel Material: Teflon Coated 416R Stainless Steel
Barrel Profile: A2 Style
Chamber: 6.5 Creedmoor
Twist Rate: 1 in 8”
Gas System: Rifle-Length
Gas Block Type: Low-profile 5 position click switch adjustable gas block
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: PA10 Flat top with Feed Ramps
Receiver Finish: PSA Custom Teflon Coated
Forward Assist: Yes
Dust Cover: Yes
Handguard Type: PSA Custom 15″ Slim-line MLOK
Bolt Carrier Group: 6.5 Creedmoor Laser Engraved BCG w/ extra power extractor spring
Staked Gas Key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: PSA Custom Finish, Teflon-based
Fire Control Group: PSA Custom 3.5lb Flat Bow Drop-in FCG
Buffer Tube: 7075 T6 Aluminum
Adjustment: 6-position telescoping stock
Stock: Magpul Carbine
Grip: Magpul MOE
Safety: PSA Custom Ambi Safety
Magazine: 20 Round PMAG
The Palmetto State Armory PA10 Gen3 features a forged receiver set that has been designed with a relief cut geometry to allow the use of a wider variety of aftermarket bolt carrier groups. A carbine length buffer tube with a short, heavy buffer coupled with a standard PA10 buffer spring. All Gen3 PA10 rifles from Palmetto State Armory come equipped with a Toolcraft BCG, which ensures thousands and thousands of rounds will feed through the rifle.
Barrel: The dimpled, Teflon-Coated 416R Stainless Steel, 6.5 Creedmoor 1/8 twist, Rifle-length gas system upper is paired with a Palmetto State Armory 15″ M-Lok free-float rail, low profile adjustable click detent 5 position gas block, and a Custom Series AR10/LR308 .308 Short Muzzle Brake device. The gas system is enhanced with a nitrided gas tube in order to better resist high heat and corrosion.
Upper: Precision machined from forged 7075-T6 aluminum, then coated with a hard as nails Teflon based finish in our PSA Custom shop. With enhanced dual retention anti-slip and anti-rotating handguards.
Bolt Carrier Group: Tool craft 9310 steel bolt assembly with extra strength extractor springs that is nitride for increased durability. 8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners. A 7075 T6 aluminum charging handle is also included.
Lower: Precision machined from forged 7075-T6 aluminum, these lowers are then coated with a hard as nails Teflon based finish in our PSA Custom shop. With a PSA Custom 3.5lb Flat Bow Fire Control Group, a Magpul MOE Stock, PSA Custom Ambi Safety, and a Magpul MOE Grip. This is an ideal platform for the 6.5 Creedmoor cartridge.
There are no reviews yet.